Lexmark TN3270E Network Card User Manual


 
114Operations - TN3270E SETUP: MISC SETTINGS > Format Ctrl Sup (IDB Option 177)
NOTE: <CSC> = &% is factory default.
<CSC> + M [m]:
If Option 177 = 0, 1 or 2:
After this command the auto-NL function is disabled. All
host generated control codes are still sent to the printer.
Normal’ 4 Standard handling of control codes
after Power On. If the <CSC>+M
command is used, CR, LF, NL and
FF codes from the host are
suppressed and the auto-NL
function is disabled.
No Codes’ 5 CR, LF, NL and FF codes from the
host are suppressed. It can be
enabled with the <CSC>-M
command. The auto-NL is still
enabled.
Normal’’ 6 Standard handling of control codes
after Power On. If the <CSC>+M
command is used, CR, LF, NL and
FF codes from the host are
suppressed. The auto-NL function
is still enabled.
Option Value IDB Value Comments