Filter
Top Products
59AS/400 and iSeries Installation Setup: Task 2 - Configuring a Print Server
IMPORTANT: The SCS/TNe Emulation can only
receive jobs through a single printer server.
Moving the selected print server or inserting a
new print server may cause a loss of SCS/TNe
print capability.
B. Configuring the Print Server
To enable SCS printing, several print server settings may need to be
changed. You can make these changes from the printer operator
panel.
1 Set NPA Mode to Auto. Select Menus > Network/Ports
Select the print server to be used for SCS printing, for
example Standard Network. Locate NPA Mode and scroll to
the Auto setting. Touch Submit to save. This setting will
ensure that the printer’s LAN connection will detect the Card.