Filter
Top Products
257IDB Basics: Editing the IDB Configuration File
Editing the IDB
Configuration File
The utility program used for editing the IDB configuration file is DOS
based and is available on the internet site with manual updates
listed in “Support” on page 4. Look for the following files.
IMPORTANT:
Option settings should not be set outside their
operator panel ranges. If this is done, then no
asterisk appears in the operator panel to indicate
the current setting. The Menu Settings Page
shows the text string "[invalid]" for options set
outside their ranges.
The retrieved IDB file contains additional options and events not
described in this guide. Only options and events described in this
guide should be configured.The IDB configuration file is edited by
starting the relevant utility program and loading the retrieved IDB
file.
Protocol File Comments
TN3270E P01-xxxx.zip This contains the 3270 IDB configuration file editor
program, also known as IDB.exe.
TN5250E P02-xxxx.zip This contains the 5250 IDB configuration file editor
program, also known as IDBT.exe.