Filter
Top Products
268TN5250e Printer Commands Using IDB: Paper Handling > Select Simplex/Duplex Printing
Paper Handling
> Select
Simplex/Duplex
Printing
This is used when simplex or duplex printing is selected. The com-
mand can only be used if the printer supports duplex printing.
It is triggered by the AS/400 or iSeries command PPM (Page Presen-
tation Media) when simplex or duplex printing is selected. It can also
be triggered by the DEFSIMDUP command at Power On. See section
“Simplex/Duplex (IDB Option 116)” on page 228.
The command corresponds to event 57 - 58.
Command:
SLTSIMDUP <parameter> <data>:
SLTSIMDUP DEL <mode>: Delete command
Parameter:
SIM Select simplex
DUP Select duplex long edge binding
TUM Select duplex short edge binding
(tumble)
Example:
SLTSIMDUP DUP /1B,"&l1S":
SLTSIMDUP DEL SIM: