Filter
Top Products
87Operations - TN3270E SETUP: Introduction
The SCS/TNe Emulation has default settings for most SCS com-
mands found in an SCS job. If one or more SCS settings are miss-
ing from a job, the SCS/TNe Emulation uses the value specified in
the SCS OPTIONS menu for the option. Settings specified in an
SCS job override the SCS/TNe Emulation default settings.
An asterisk (*) next to a value setting indicates that the setting is
currently active. The current setting for each option is listed on the
Menu Settings page (“How to access the Menu Settings Page” on
page 78).
Options using text strings as settings which have not been config-
ured display the text string "[undefined]" and show "[undefined]" on
the Menu Settings page.
Options using values as settings which are set outside their ranges
do not have an asterisk in the operator panel to indicate the current
setting. The Menu Settings page shows the text string "[invalid]" for
options set outside their ranges. Invalid will print for installed fea-
tures which were selected as the option value but have been unin-
stalled. Select one of the currently installed features. Setting options
to values outside the ranges shown in the operator panel is possible
via remote configuration and should be avoided.