Filter
Top Products
32Mainframe Installation Setup: Task 1A - Configuring the Host
Sample Configuration Number 3:
Local Device - Using VTAM LOCAL LU nodes
First create a major node in VTAM to define the VTAM LU's (printer
or terminal devices) for telnet sessions as follows:
TCP VBUILD TYPE=APPL
SC0TCP01APPL AUTH=NVPACE,
EAS=1,
PARSESS=NO,
MODETAB=ISTINCLM,
SESSLIM=YES
IMLU1 APPL AUTH=NVPACE,EAS=1,PARSESS=NO,
MODETAB=MODETAB2,SESSLIM=YES,DLOGMOD=SCS
DHW3270 APPL AUTH=NVPACE,EAS=1,PARSESS=NO,
MODETAB=MODETAB2,SESSLIM=YES,DLOGMOD=SCS
EJ3270 APPL AUTH=NVPACE,EAS=1,PARSESS=NO,
MODETAB=MODETAB2,SESSLIM=YES,DLOGMOD=SCS
NOTE: IMLU1; DHW3270; and EJ3270; are the printer devices.
SC0TCP01 is a terminal device, and is not needed for printer
definitions in this node.