Filter
Top Products
45Mainframe Installation Setup: Task 4 - Configuring the SCS Settings
Task 4 -
Configuring the
SCS Settings
Several SCS option values may need to be changed to properly for-
mat and print SCS jobs that do not contain formatting commands in
the job. The following three settings are usually the most important,
but there are many other possibilities.
TIP:
Refer to Operations Reference - TN3270E
SETUP: SCS3270 Defaults, page 153 to see the
differences in these settings.
A. To select Non-US SCS3270 Defaults
Factory defaults are US. To change or restore:
1 Select Menus > Option Card Menu > SCS/TNe MENU >
TN3270E SETUP > TEST OPTIONS > SCS3270 Defaults.
2 Scroll to the desired value. Touch Submit to save one of the
factory defaults.
3 Exit the menu by touching Home.
TEST OPTIONS Option Default Value Recommended Value Comments
SCS3270 Defaults Do Not Restore Your preferred
defaults
Choose between Do Not Restore *,
US-Default, or Non-US-Default