Filter
Top Products
47Mainframe Installation Setup: Task 5 - Configuring the SCS/TNe Emulation
3 Exit the menu by touching Home.
Task 5 -
Configuring the
SCS/TNe
Emulation
SCS jobs are printed from a LAN connected Mainframe using TCP/
IP and the telnet extended (TN3270e) protocol. A single TN3270e
print session can be established with a host.
To configure a TN3270e print session
IMPORTANT:
Powering the printer Off and On does not end
TCP/IP and Telnet sessions in an orderly manner.
To power the printer Off properly, select Menus >
Option Card Menu > SCS/TNe MENU >
COMMON SETUP > Disconnect Ses >
Disconnect Ses.
See: Disconnect Ses, page 80.
1 Select Menus > Option Card Menu > SCS/TNe MENU >
TN3270E SETUP > NETWORK SETUP > SERVER INFO.
2 Configure the SERVER INFO options. Enter or scroll to new
values and touch Submit to save your settings. The menu
will return to the SERVER INFO menu group within which
you scroll to the next desired option. When you are finished
with all options within SERVER INFO, touch Home to exit.