Lexmark TN3270E Network Card User Manual


 
100Operations - TN3270E SETUP: NETWORK SETUP > SERVER INFO > LU Name
LU Name This Network Setup > Server Info option specifies the LU name
assigned to the SCS/TNe Emulation on the host or SNA gateway.
IMPORTANT:
An LU name must be specified in order for the
SCS/TNe Emulation to connect to the host or
SNA gateway.
Remember also to check the setting of the Device Type option. If a
specific LU name is requested, then the name must be defined and
available on the host.
After a connection is active, the LU name can be viewed with the
Connect Status option or on the Menu Settings page
( “How to access the Menu Settings Page” on page 78).
Check with your system administrator for the correct LU name to
use.
Option Value Comments
[undefined] * Any ASCII text string up to 10 characters.