Lexmark X342n All in One Printer User Manual


 
Scanning documents using the control panel (USB attach only)
55
Scanning documents using the control panel (USB
attach only)
1 Make sure:
The computer is on.
The computer is attached to the MFP.
The software has been loaded onto the computer.
2 Load an original document face-up into the ADF or face-down on the scanner glass.
Note: Do not load postcards, index cards, small items, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
3 From the control panel, press Scan.
4 Press or repeatedly until the application you want to use appears.
Note:
If you do not see the application you want to use, configure additional
applications for scanning. For more information, see Configuring additional
applications for scanning on page 56.
Adjust the scan settings using the computer. For more information, see
Customizing scan settings on page 58.
5 Press Start.
The MFP scans the document.
6 If prompted, press 1 (for yes) if you have more pages, or 2 (for no) if you have finished
scanning the entire document.
Scanning documents using the computer (USB attach
only)
1 Make sure:
The computer is on.
The computer is attached to the MFP.
The software has been loaded onto the computer.
2 Load an original document face-up into the ADF or face-down on the scanner glass.
3 Open QLINK:
Double-click the QLINK icon on the desktop.