Lexmark X500N Computer Monitor User Manual


 
Place Next Page: Then Press Set
Place the next page to be scanned on the scanner glass, and then press .
Please Wait
Wait for the message to clear.
Printing
The printer is printing a fax. Wait for the message to clear.
Ready
The printer is ready to receive print jobs.
Receiving
The printer is receiving a fax. Wait for the message to clear.
RX Comm Error
An incoming fax transmission error has occurred. Wait for the fax to be re-sent.
Scan Calibration Error
Make sure the scanner lock is unlocked, and then reset the printer.
Check for debris on the scanner glass (which includes the document glass and the ADF glass), and then reset
the printer.
If the message appears again, contact Customer Support, and report the message.
Scan Lock Error: Unlock Scanner
The scanner is locked. Open the scanner cover, and then unlock the scanner.
Scan Memory Near Full
There may be insufficient memory to complete the current scan job. If the job fails to scan, cancel the job, and then
try scanning it again.
Scan Network Disconnect
Check the network cable connection. Make sure the network cable is securely connected to the computer and the
printer.
Scan USB Disconnect
Check the USB cable connection. Make sure the USB cable is securely connected to the computer and the printer.
Scanning Page
The scanner is busy. Wait for the message to clear.
Send Email Notify: Send Email Notification
An alert has been activated on the printer that requests an e-mail notification to be sent.
Sending File
The scanned image is being sent to the selected destination. Wait for the message to clear.
97