Filter
Top Products
29
9.2.10. Removing the Solenoid
Preparation : perform the section 9.2.1. to 9.2.4.
1. Remove the 1 screw (O) and then remove the
Solenoid.
Screw (O) : DXQT2+F2FNL (N14)
9.2.11. Removing the Main Board
Preparation : perform the section 9.2.1. to 9.2.4.
first.
1. Remove the 1 screw (P), (Q) and 2 screws (R), (S).
Screw (P) : DXQT2+E10FNL (N10)
Screw (Q) : DXQT2+D4FNL (N9)
Screw (R) : DFHE5035ZB (N2)
Screw (S) : K1YE50000022 (N500)
9.2.8. Removing the LCD Knob
Preparation : perform the section 9.2.1. to 9.2.4.
1. Remove the spring from the top case.
2. Remove the hook of LCD knob from the stopper rib
of the top case and then the LCD knob is removed.
9.2.9. Removing the Speaker
Preparation : perform the section 9.2.1. to 9.2.4.
first.
1. Peel off the speaker box sheet.
2. Peel off the tape on the speaker and speakerring
and then remove the speaker.
Location of the Spring
Stopper Rib
Latch
Spring
Top Case
LCD Knob
Speaker Box Sheet
Speaker
Speaker
Ring
Top Case
Solenoid
Screw
Screw (Q)
Screw (P)
Screw (R)
Screw (S)