Filter
Top Products
32
9.2.16. Removing the MODEM
Preparation : perform the section 9.2.1. to 9.2.4.
and 9.2.11. first.
1. Remove the 2 screws (V).
Screw (V) : DXQT2+D25FNL (N8)
2. Remove the MODEM to the vertical direction from
connector (CN18) on the main board.
9.2.17. Removing the Card Bus Ejector
Preparation : perform the section 9.2.1. to 9.2.3.
and 9.2.11. first.
1. Remove the 1 screw (W) from connection side of
wireless LAN.
Screw (W) : DFHE5025XA (N1)
2. Return it on the revers to card bus ejector side.
3. Remove the 2 hooks (C) of the card bus ejector from
the connector (CN14) and the card bus ejector is
removed.
Screw (V)
Screw (V)
CN18
MODEM
Main Board
Screw (W)
Main Board
Card Bus Ejector
Hook(C)
CN14