Filter
Top Products
30
2. Remove the 2 screws (T).
Screw (T) : DXQT2+E6FNL (N13)
3. Remove the connector (CN23)
4. The antenna cover (L) is inclined in the direction of
arrow A and remove it.
Remove theantenna cover (L) from the topcase.
5. Remove the connectors (CN10), (CN11) of LCD
cable and (CN28) of WWAN cable.
6. Remove the DC-IN jack holder.
7. Returns the main board on the reverse.
Peel the tape (A) of the drive FFC and remove the
FFC.
8. Remove the connector (CN3) and the connector
(CN16) of LAN cable.
Peel off the tape (B) of HDD FFC and remove the
FFC.
9. Remove the main board.
Antenna Cover (L)
Antenna PCB (L)
Screw (T)
Screw (T)
Main Board
Bottom Case
CN23
A
CN10
CN11
LCD Cable
CN28
DC Jack
Holder
Main Board
Bottom Case
CN3
LAN
Cable
CN16
Lithium Battery
Cable
Tape (B)
Tape (A)