Filter
Top Products
y VID: VLAN identifier. This will be filled only when tagged VLAN is applied. Valid range is 1 ~ 4094.
y Queue (Priority):
Set up the priority (0~3) for the MAC.
y Forwarding Rule(Drop Policy):
Static:
A MAC address is assigned to a specific port, all of the switch’s traffics sent to this MAC address will
be forwarded to this port.
Static with Destination Drop:
While the DA of the incoming packets meets the value you set up, these packets will be dropped.
Static with Source Drop:
While the SA of the incoming packets meets the value you set up, these packets will be dropped.
y Port :
Select the port No. you would like to do setup in the switch. It is 1 ~26.
3.10.4 MAC Alias
MAC Alias function is used to let you assign MAC address a plain English name. This will help you tell which
MAC address belongs to which user in the illegal access report. At the initial time, it shows all pairs of the
existed alias name and MAC address.
There are three MAC alias functions in this function folder, including MAC Alias Add, MAC Alias Edit and MAC
Alias Delete. You can click <Create/Edit> button to add/modify a new or an existed alias name for a specified
MAC address, or mark an existed entry to delete it. Alias name must be composed of A-Z, a-z and 0-9 only
and has a maximal length of 15 characters.
In the MAC Alias function, MAC Alias Add/Edit function is used to let you add or modify an association
between MAC address and a plain English name. User can click <Create/Edit> button to add a new record
with name.
As to MAC Alias Delete function is used to let you remove an alias name to a MAC address. You can select an
existed MAC address or alias name to remove.
Parameter description:
y MAC:
It is a six-byte long Ethernet hardware address and usually expressed by hex and separated by
hyphens. For example,
00 - 40 - C7 - D6 - 00 - 01
y Alias: MAC alias name you assign.
Note: If there are too many MAC addresses learned in the table, we recommend you inputting the MAC
32