Filter
Top Products
Dynamic Host Configuration Protocol
3-175
3
Configuring a Network Address Pool
Web – Click DHCP, Server, Pool Configuration. Click the Configure button for any
entry. Click the radio button for “Network.” Enter the IP address and subnet mask for
the network pool. Configure the optional parameters such as gateway server and
DNS server. Then click Apply.
Figure 3-105 DHCP Server Pool - Network Configuration
CLI
– This example configures a network address pool.
Console(config)#ip dhcp pool tps 4-131
Console(config-dhcp)#network 10.1.0.0 255.255.255.0 4-132
Console(config-dhcp)#default-router 10.1.0.253 4-133
Console(config-dhcp)#dns-server 10.2.3.4 4-134
Console(config-dhcp)#netbios-name-server 10.1.0.33 4-135
Console(config-dhcp)#netbios-node-type hybrid 4-136
Console(config-dhcp)#domain-name example.com 4-133
Console(config-dhcp)#bootfile wme.bat 4-135
Console(config-dhcp)#next-server 10.1.0.21 4-134
Console(config-dhcp)#lease infinite 4-136
Console(config-dhcp)#