Filter
Top Products
4-58
DOS Printing Utilities
Chapter 4Printer Driver
Page Protection
Page Protection
allows the printer to process the data for the entire
document before it is printed. When
Auto
is selected, the printer ana-
lyzes each page and turns on
Page Protection
automatically only
when it is required. Selecting
On
always keeps sufficient memory
reserved to ensure that a page can be fully composed.
I/O Timeout
The value you select in this box specifies the number of seconds the
printer waits for data. The printer automatically cancels the print job if
data does not arrive within the time you specify here.
Using the Status Display
This section describes how to display the Status Display and make
changes in the operating environment of the Status Display.
To Display the Status Display
After the Status Display is loaded, perform the required hot key combi-
nation (a combination of keys you press at the same time to perform an
operation) to display the Status Display. The following is the default
hot key combination.
[ctl]+[alt]+[R]
You can change the hot key combination after the Status Display screen
appears.
To select an item on the Status Display, first highlight it and then press
Enter
to advance to its setting screen. You can clear the Status Display
at any time by pressing
Esc
.
The following is a brief explanation of the items that are available on
the Status Display. Further information can be found in the Status Dis-
play’s online help.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500