Filter
Top Products
157
Application instructions
3
SEQUENCE PROGRAMMING
(2) ANDs the 16-bit data of the device specified at and the 16-bit data of the
device specified at on a bit-by-bit basis, and stores the result into the device
specified at .
(3) More than the digit designation of a bit device is regarded as 0 for operation.
Execution Conditions
The execution conditions of the logical product instructions are as shown below.
Program Examples
1)Program that masks the tenth digit (second place from the least significant digit)
with 0 among the four BCD digits of D10 when XA turns on.
S1
S2
D1
Before
execution
After
execution
16 bits
WAND
WANDP
Operation
command
Executed every
scan.
Executed every
scan.
Executed only once.Executed only once.
WAND
Coding
(D10)=1234 1204
→