Filter
Top Products
Installation and Configuration
NPort Server Pro User’s Manual 7-15
Reset Port
This function is provided to allow you to reset the port whenever the NT/95/98 server was not shut
down properly, or the network was disconnected. Normally, NPort Server Pro will be launched
automatically five minutes after the NT/95/98 server is reconnected. This function allows you to
restart the port manually if necessary. While resetting the port, the port transmission process will be
halted, and all temporary data will be lost.
. Note: Do not use Port Reset while transmitting IMPORTANT data.
1. Click on the port that you are going to reset to highlight it.
2. Choose Reset Port from the Monitor menu, or click on the toolbar Reset Port icon to
reset the port.
. Note: If you have previously set up the security password using NPort Pro Manager, a
Reset Port dialog box will open requesting a password before resetting the port. If you
did not set up the security password, the following dialog box will not be displayed.
3. Enter the correct password and then click OK.
Reset Server
This function is provided to allow you to reset NPort Server Pro whenever the NT/95/98 server was
not shut down properly or the network was disconnected. Normally, NPort Server Pro will
automatically launch five minutes after the NT/95/98 server is reconnected. This function allows you
to restart the server manually if necessary. While resetting the server, the server transmission process
will be halted and all remaining data will be cleared.
. Note: Do not use Reset Server while transmitting IMPORTANT information.