Filter
Top Products
4-14 NPort Server Pro User’s Manual
Server Properties—General
1. Select the General tab in the
Server Properties window.
2. Modify the server name as desired.
3. Select Enable or Disable, for DHCP,
depending on whether or not you are
using a DHCP server.
Server Properties—Password
To add more security to your NPort Server Pro, it is highly recommended that you set a password as
soon as you complete the installation. If you did not set the password while running Add Server
Wizard, or you would like to change the current password, you may use the toolbar Properties
function to do so.
You may also use this function to “Auto-Save”, i.e., to have Windows NT/95/98 remember your
password for you. By auto saving the password, you will not be asked to enter the password when
modifying server properties from this computer.
. Note: Keep in mind that other people using your computer will also have ready access to
the NPort Pro Manager functions.
Steps for configuring the server’s
password:
1. Select the Password tab in the
Server Properties window.
2. Enter the current password and
new password as indicated.
3. Check the Auto Save Password on
this computer box if you want
Windows NT/95/98 to remember
your password.
. Note: If you do not check the Auto Save Password on this computer box, you will need to
enter the correct password each time you want to view Server Properties.