Filter
Top Products
Setting Up Multi-Host
NPort Server Pro User’s Manual 5-19
2. Click on the server you would like to modify.
3. Click on Add IP to open the Grant Access IP window.
4. To add access for only one computer, select a single computer, and then enter the
host’s IP address in the appropriate text box.
To add access for a group of computers, select a group of computer, and then enter
the IP address and netmask. (E.g., for network class C computers, you might enter
192.168.1.0 for IP address and then 255.255.255.0 for netmask.)
5. Click OK.
6. When the Add Port window opens up, highlight the port(s) that the host will be
granted access to.
. Note: You can select blocks of ports by holding down the left mouse button while scrolling
through the list of ports.