Filter
Top Products
3
3
Chapter 3 Featured Functions
This chapter explains how to access PT-7728’s various configuration, monitoring, and
administration functions. These functions can be accessed by serial, Telnet, or web console. The
serial console can be used if you do not know PT-7728’s IP address and requires that you connect
the PT-7728 to a PC COM port. The Telnet and web consoles can be opened over an Ethernet
LAN or the Internet.
The web console is the most user-friendly way to configure PT-7728. In this chapter, we use the
web console interface to introduce the functions. There are only a few differences between the web
console, serial console, and Telnet console.
The following topics are covered in this chapter:
Configuring Basic Settings
Using Port Trunking
Configuring SNMP
Using Communication Redundancy
Using Traffic Prioritization
Using Virtual LAN
Using Multicast Filtering
Using Bandwidth Management
Using Port Access Control
Using Auto Warning
Using Line-Swap-Fast-Recovery
Using Set Device IP
Using Diagnosis
Using Monitor
Using the MAC Address Table
Using Event Log
Using Syslog