Filter
Top Products
PT-7728 User’s Manual Featured Functions
3-26
*Both Ring 1 and Ring 2 must be enabled when using the dual-ring architecture.
Set as Master
Setting Description Factory Default
Enabled
The PT-7728 is manually selected
as the master.
Disabled
The Turbo Ring or Turbo Ring V2
protocol will automatically select
the master.
Not checked
Redundant Ports
Setting Description Factory Default
1st Port
This specifies which port on the
PT-7728 will be used as the first
redundant port.
None
2nd Port
This specifies which port on the
PT-7728 will be used as the second
redundant port.
None
Enable Ring Coupling
Setting Description Factory Default
Enable
This specifies that this PT-7728
will be a ring coupler.
Disable
This specifies that this PT-7728 is
not a ring coupler.
Not checked
Coupling Mode
Setting Description Factory Default
Dual Homing
This enables dual homing through
the PT-7728.
None
Ring Coupling
(backup)
This specifies that the PT-7728 will
be used for a ring coupling backup
connection.
None
Ring Coupling
(primary)
This specifies that the PT-7728 will
be used for a ring coupling primary
connection.
None
Primary/Backup Port
Setting Description Factory Default
Primary Port
This specifies which port on the
PT-7728 will be used as primary
port.
None
Backup Port
This specifies which port on the
PT-7728 will be used as the backup
port.
None