Filter
Top Products
PT-7728 User’s Manual Featured Functions
3-43
Configuring Virtual LAN
VLAN Settings
To configure 802.1Q VLAN on the PT-7728, use the VLAN Setting page to configure the ports.
Management VLAN ID
Setting Description Factory Default
VLAN ID from 1
to 4094
This assigns the VLAN ID of this PT-7728. 1
Port Type
Setting Description Factory Default
Access This port type is used to connect single devices without
tags.
Trunk Select Trunk port type to connect another 802.1Q
VLAN aware switch or another LAN that combines
tagged and/or untagged devices and/or other
switches/hubs.
Access
ATTENTION
For communication redundancy in the VLAN environment, set Redundant Port Coupling Port
and Coupling Control Port as Trunk Port since these ports act as the backbone to transmit all
packets of different VLANs to different PT-7728 units.
Port PVID
Setting Description Factory Default
VID range from 1
to 4094
This sets the default VLAN ID for untagged devices that
connect to the port.
1