Filter
Top Products
PT-7728 User’s Manual Featured Functions
3-16
Admin Auth. Type (for SNMP V1, V2c, V3, and V3 only)
Setting Description Factory Default
No-Auth
This allows the admin account to access
objects without authentication.
No
MD5-
Auth
Authentication will be based on the
HMAC-MD5 algorithms. 8-character
passwords are the minimum requirement
for authentication.
No
SHA-
Auth
Authentication will be based on the
HMAC-SHA algorithms. 8-character
passwords are the minimum requirement
for authentication.
No
Admin Data Encryption Key (for SNMP V1, V2c, V3, and V3 only)
Setting Description Factory Default
Enable
This enables data encryption using the
specified data encryption key (between 8
and 30 characters).
No
Disable
This specifies that data will not be
encrypted.
No
User Auth. Type (for SNMP V1, V2c, V3 and V3 only)
Setting Description Factory Default
No-Auth
This allows the admin account and user
account to access objects without
authentication.
No
MD5-Auth
Authentication will be based on the
HMAC-MD5 algorithms. 8-character
passwords are the minimum requirement
for authentication.
No
SHA-Auth
Authentication will be based on the
HMAC-SHA algorithms. 8-character
passwords are the minimum requirement
for authentication.
No
User Data Encryption Key (for SNMP V1, V2c, V3 and V3 only)
Setting Description Factory Default
Enable
This enables data encryption using the
specified data encryption key (between 8
and 30 characters).
No
Disable No data encryption No
Trap Settings
1
st
Trap Server IP/Name
Setting Description Factory Default
IP or name
This specifies the IP address or name of
the primary trap server used by your
network.
None