MRV Communications TS5000/4U1/V*) Mouse User Manual


 
MRV Communications, Inc. – Installation Manual
59
Unpacking Instructions for TS4000/5000
The JMP-8 is shipped assembled to the AD-5000, inside the accessories packing
box. It must be dismantled prior to installation.
1. Unpack all the accessories.
2. Loosen completely the four ‘D’ (M8 hex. screws, using
wrench #13 and take the AD-5000 off the base JMP-8
(Save the screws for later use). Do not attempt to loosen or
tighten any screws on the AD-5000 other than those
specified in this manual.
KEEP IN SECURE PLACE ALL THE BOLTS AND SCREWS. YOU
WILL NEED THEM FOR THE INSTALLATION.
APPENDIX C
The packing box
contains:
Big box with one
Transceiver
TS4000/5000
Smaller box with
accessories:
AD-5000 &
JMP-8
JITK – Installer
tools kit and
screws
CD manuals
Flexible ducts x 2
Flange x 2
‘D’ Screws
(Two in front, two behind)
Fig C.1: The Four ‘D’ Screws