Filter
Top Products
Main Setup Menu ION 7500 / ION 7600 User’s Guide
Page 34 Chapter 2 - Using The Front Panel
Main Setup Menu
Press the PROG button to enter the main setup menu. The following table
summarizes the front panel’s Setup menu functions:
Highlight the Setup menu item that you want to access with the vertical navigation
buttons. To select the item, press the
PROG button. The content of each Setup menu
item is described on the following pages.
Demand Setup Menu
Demand Setup provides access to all of the factory-configured parameters for
sliding window demand (rolling block) and thermal demand.
The ION module setup register corresponding to each Demand Setup value is
included for advanced users; these are found in the description for each Demand
Setup value. Refer to the online ION Programmer’s Reference for complete details
about Sliding Window Demand modules and Thermal Demand modules.
Sliding Window Demand (Rolling Block) Settings
The Sliding Window sub-menu contains the following settings:
Sub Interval
This numeric value specifies the number of seconds in the sliding window demand
sub-interval. Setting the
SUB INTERVAL value changes the Sub Intvl setup register in
all factory-configured Sliding Window Demand modules.
Setup Menu Item Description
Basic Setup Changes basic settings in the power measurement system configuration
Demand Setup Sliding Window (Rolling Block) and Thermal Demand settings
COM1 Setup RS-232 or RS-485 port setup
COM2 Setup High-speed RS-485 port setup
COM3 Setup Optical port (infrared) and optional internal modem setup
Network Setup Ethernet Network addressing
PQ Setup Sets the criteria (including nominal voltage) for disturbance detection
Format Setup Customizes the style and values appearing on the display screens
Display Setup Customizes display appearance and update rate
Time Setup Clock and meter time settings
Security Setup Modify and enable/disable password functions
Meter Resets Reset functions for factory and user determined cumulative parameters