Filter
Top Products
Chapter 4 Getting Started with Measurement Studio
© National Instruments Corporation 4-15 Measurement Studio for MCC User Manual
• Generating and displaying the data—Using the MccDaq.Scan
components, you will read data from a channel on an Measurement
Computing device, convert the data object to an array, and show the
value on a waveform graph.
Before You Begin
The following components are required to complete this walkthrough:
• Microsoft Visual Studio .NET 2003 or Microsoft Visual Studio 2005
• Measurement Studio Measurement Computing Edition
• MccDaq Scan Components
• Measurement Computing DAQ device
Note For information about installing and configuring your Measurement Computing
DAQ device, refer to the Quick Start Guide that ships with your device. You can also use
the DEMO-BOARD simulated DAQ device to complete this walkthrough.
Setting up the project
1. Select Start»All Programs»Microsoft Visual Studio .NET 2003»
Microsoft Visual Studio .NET 2003.
2. Select File»New»Project. The New Project dialog box launches.