Chapter 2 Installation and BIOS Setup
© National Instruments Corporation 2-7 NI 8352/8353 User Manual
Ultra DMA Mode
Use this option to select Ultra DMA Mode. The options are Disabled
(default), Mode 0, Mode 1, Mode 2, Mode 3, Mode 4, and Mode 5.
System Memory
This display shows the amount of system memory.
Extended Memory
This display shows the amount of extended memory.
Advanced Setup
Choose Advanced from the Phoenix BIOS Setup Utility main menu with
the arrow keys. To access submenus, highlight a menu item and press
<Enter>.
Boot Features
Access this submenu to change the following settings.
QuickBoot Mode
If enabled, this feature speeds up the Power On Self Test (POST) routine
by skipping certain tests after the computer is turned on. The settings are
Enabled (default) and Disabled. If disabled, the POST routine runs at
normal speed.
Quiet Boot
Use this setting to enable or disable the graphic logo screen during bootup.
The settings are Enabled (default) and Disabled.
ACPI Mode
Use this setting to employ Advanced Configuration and Power Interface
(ACPI) power management on your system. The options are Yes (default)
and No.
Power Button Behavior
If set to Instant-Off, the system powers off immediately when you press
the power button. If set to 4-sec override, the system powers off when you
press the power button for 4 seconds or longer. The options are Instant-Off
(default) and 4-sec override.
