Filter
Top Products
Chapter 2 Installation and BIOS Setup
NI 8352/8353 User Manual 2-10 ni.com
Discrete MTRR Allocation
If enabled, Memory Type Range Registers (MTRRs) are configured as
distinct, separate units and cannot be overlapped. If enabled, you can
achieve better graphic effects when using a Linux graphic driver that
requires the write-combining configuration with 4 GB or more memory.
The options are Enabled and Disabled (default).
PCI Configuration
Access this submenu to make changes to the following PCI device settings.
Onboard GLAN1/Onboard GLAN2 (Gigabit-LAN) OPROM
Configure
Enable this option to boot from GLAN. The options are Disabled and
Enabled (default).
Reset Configuration Data
If set to Yes, this setting clears the Extended System Configuration Data
(ESCD) area. The options are Yes and No (default).
Frequency for PCI-X
Use this option to change the bus frequency for the devices installed in the
slot indicated. The options are Auto (default), PCI 33 MHz, PCI 66 MHz,
PCI-X 66 MHz, PCI-X 100 MHz, and PCI-X 133 MHz.
Slot1 PCI 32, Slot6 PCI-X 133 MHz, and Slot6
PCI-Exp. x8
Access these submenus to change the following settings.
Option ROM Scan
When enabled, this setting initializes the device expansion ROM. The
options are Enabled (default) and Disabled.
Enable Master
Use this setting to enable the selected device as the PCI bus master. The
options are Enabled (default) and Disabled.