Filter
Top Products
Chapter 2 Installation and BIOS Setup
© National Instruments Corporation 2-19 NI 8352/8353 User Manual
Clear System Event Logging
Select Enabled to force the BIOS to clear the system event logs during the
next cold boot. The options are Enabled and Disabled (default).
Existing Event Log Number
This item displays the existing event log number.
Event Log Control
System Firmware Progress
Select Enabled to log POST progress. The options are Enabled and
Disabled (default).
BIOS POST Errors
Select Enabled to log POST errors. The options are Enabled and Disabled
(default).
BIOS POST Watchdog
Select Enabled to enable POST Watchdog. The options are Enabled and
Disabled (default).
OS Boot Watchdog
Select Enabled to enable OS Boot Watchdog. The options are Enabled
and Disabled (default).
Timer for Loading OS (Minutes)
Use this setting to set the time value (in minutes) for OS Boot Watchdog by
entering a desired number. The default setting is 10 (minutes). (Ignore this
option when OS Boot Watchdog is set to Disabled.)
Time Out Option
Use this setting to determine what action to take in an event of a system
boot failure. The options are No Action (default), Reset, Power Off, and
Power Cycles.