Filter
Top Products
Appendix B Hardware Configuration
© National Instruments Corporation B-19 NI 8352/8353 User Manual
Installing DDR Modules
Follow these steps to install DDR modules:
1. Press the cover release buttons on the top of the NI 8352/8353.
2. Push the cover backward to remove it.
3. Align the notch in the center of the DDR DIMM module with the key
on the DIMM slot. Insert the module vertically into the slot and push
it in until the pins are fully inserted, as shown below.
4. When the module is fully inserted, the plastic clip at each side of the
slot automatically closes, as shown below.
5. Replace the NI 8352/8353 cover by sliding the cover forward. Make
sure the safety lock fits firmly.
1Notch 2Key
1 2