Filter
Top Products
Chapter 2 Installation and BIOS Setup
NI 8352/8353 User Manual 2-12 ni.com
Route Port 80h Cycles to
Use this feature to select the bus where debug information is sent. The
options are Disabled, PCI (default), and LPC.
USB Function
Select Enabled to enable the function of specified USB devices. The
settings are Enabled (default) and Disabled.
Legacy USB Support
Use this setting to enable support for legacy USB devices. The settings are
Enabled (default) and Disabled.
Advanced Processor Options
Access this submenu to change the following settings.
CPU Speed
This display indicates the installed processor speed.
Frequency Ratio
1
Use this feature to set the CPU internal frequency multiplier. The options
are Default, x12, x13, x14, x15, x16, x17, and x18.
Hyperthreading
1
Set to Enabled to use hyperthreading for increased CPU performance. The
options are Disabled and Enabled (default).
Machine Checking
1
Set to Enabled to activate machine checking, which allows the CPU to
detect and report hardware (machine) errors via a set of model-specific
registers (MSRs). The options are Disabled (default) and Enabled.
L3 Cache
1
Set to Enabled to enable the L3 cache function, which optimizes system
and CPU performance. The options are Disabled and Enabled (default).
1
Available when the CPU supports this feature.