Filter
Top Products
Chapter 2 Installation and BIOS Setup
NI 8352/8353 User Manual 2-22 ni.com
Load Setup Defaults
Highlight this item and press <Enter> to load the default settings for all
items in the BIOS Setup. These are the safest settings to use.
Discard Changes
Highlight this item and press <Enter> to discard (cancel) any changes you
made. You will remain in the setup utility.
Save Changes
Highlight this item and press <Enter> to save any changes you made. You
will remain in the setup utility.
Rack Mounting
Note To rack mount the NI 8352/8353, the chassis must be at least 26 in. deep.
The rack mounting hardware includes:
• One pair of inner slides to be installed on the chassis.
• One pair of outer slides to be installed in the rack.
• Two pairs of short brackets for the front of the outer slides.
Note One pair of short brackets includes screw threads, and the other pair does not.
Use the pair that fits into your rack.
• One pair of long brackets for the rear of the outer slides.