Filter
Top Products
Configuring Your Server 4-39
SCSI Device Configuration
Move the cursor onto "SCSI Device Configuration" and press Enter to display the
following submenu.
SCSI Device Confi
g
uration
SCSI Device ID #0 #1 #2 #3 #4 #5 #6 #7
Sync Transfer Rate (MB/Sec) ------------ 320 320 320 320 320 320 320 320
Packetized ------------------------------------- Yes Yes Yes Yes Yes Yes Yes Yes
QAS ---------------------------------------------- No No No No No No No No
Initiate Wide Negotiation ------------------ Yes Yes Yes Yes Yes Yes Yes Yes
Enable Disconnection --------------------- Yes Yes Yes Yes Yes Yes Yes Yes
Send Start Unit Command --------------- Yes Yes Yes Yes Yes Yes Yes Yes
BIOS Multiple LUN Support -------------- No No No No No No No No
Include in BIOS Scan ---------------------- Yes Yes Yes Yes Yes Yes Yes Yes
SCSI Device ID #8 #9 #10 #11 #12 #13 #14 #15
Sync Transfer Rate (MB/Sec) ------------ 320 320 320 320 320 320 320 320
Packetized ------------------------------------- Yes Yes Yes Yes Yes Yes Yes Yes
QAS ---------------------------------------------- No No No No No No No No
Initiate Wide Negotiation ------------------ Yes Yes Yes Yes Yes Yes Yes Yes
Enable Disconnection --------------------- Yes Yes Yes Yes Yes Yes Yes Yes
Send Start Unit Command --------------- Yes Yes Yes Yes Yes Yes Yes Yes
BIOS Multiple LUN Support -------------- No No No No No No No No
Include in BIOS Scan ---------------------- Yes Yes Yes Yes Yes Yes Yes Yes
The following table lists submenu items, available parameters, and descriptions.
IMPORTANT: Select a parameter for each submenu item on a per-
SCSI ID basis. Verify the SCSI ID of a desired device before
configuration.
NOTE: To find out the SCSI ID for the optional device connected,
select "SCSI Disk Utilities" on the Options menu and press Enter.
See "SCSI Disk Utilities" for detail.