NEC 140Rc-4 Server User Manual


 
2-14 General Description
STANDARD FEATURES
High performance Expandability
Intel
Xeon
TM
Processor MP
N8100-1023F: 2.20GHz/2MB
N8100-1024F: 3GHz/4MB
High-speed memory access
(Supports PC-200-compliant registered
ECC DDR DRAM)
High-speed 1000BASE-T/100BASE-
TX/10BASE-T interface
(1000Mbps/100Mbps/10Mbps supported)
High-speed disk access
(Ultra320 SCSI x 2)
Wide variety of optional I/O slots
Two 32-bit/33 MHz PCI slots
Six 64-bit/100 MHz PCI-X sots
(four slots support hot-plug)
Large memory of up to 24 GB
3.5-inch hard disk drive bay holds five
hot-swap SCSI hard disk drives
Remote power-on feature
Up to four multi-processors are available
for upgrade.
Many SCSI device connection patterns
USB interface
Many Available Features
Graphic accelerator "RAGE XL" support
El Torito Bootable CD-ROM (no
emulation mode) format support
POWER switch mask
Software power-off
Remote power-on feature
AC-LINK feature
Intelligent Platform Management
Interface (IPMI) feature
Baseboard Management Controller
(BMC)
Remote console feature
High-reliability Self-diagnosis
Power On Self-Test (POST)
Test and Diagnosis (T&D)
Maintenance Features
Off-line Maintenance Utility
Memory dump feature using the DUMP
switch
Power Saving Feature
Sleep feature (available for Windows
Server 2003/Windows 2000)
Easy and Fine Setup
Memory mirroring feature
Online sparing memory feature
Memory monitoring feature (single-bit
error correction/ double-bit error
detection)
CPU/memory degradation feature
(logical isolation of a failed device)
Bus parity error detection
Thermal sensor
Error notification
Internal cooling fan monitoring feature
Internal voltage monitoring feature
BIOS password feature
Security feature (security lock)
Redundant power supply
Disk array (optional)
NEC EXPRESSBUILDER (system setup
utility)
Express Setup
Configuration Diskette Creator
SETUP (BIOS setup utility)
SCSISelect (SCSI device utility)
Management Utilities
NEC ESMPRO
NEC Management Workstation
Application (NEC MWA)