Filter
Top Products
6-14 Installing and Using Utilities
CONFIGURATION DISKETTE CREATOR
"Configuration Diskette Creator" is a tool to create [Configuration Diskette] that is used for
configuring the server with the Express Setup (see Chapter 5 for details).
If you use the Configuration Diskette created by the Express Setup and Configuration Diskette
Creator to operate the setup, you can setup from the installation of OS to several utilities
automatically except for a few key input to confirm the specification. Also, you can install the
system with the same specification as before when re-installing the system. We recommend you to
create [Configuration Diskette] to setup the servers from NEC EXPRESSBUILDER.
NOTE: You can install Windows 2000/Windows Server 2003 without
[Configuration Diskette]. Also, you can modify/newly create
[Configuration Diskette] during the setup with NEC
EXPRESSBUILDER.
Installing Configuration Diskette Creator
This section describes about installing Configuration Diskette Creator on the computer that is
running with Windows XP/2000, Windows Server 2003, Windows NT 3.51, and Windows
95/98/Me to create Configuration Diskette.
NOTE: Configuration Diskette Creator works on PC-AT compatible
computers.
Windows XP/2000 / Windows Server 2003 / Windows NT 4.0 / Windows 95/98/Me
Follow the procedure below to install Configuration Diskette Creator on the computer that is
running with Windows XP/2000, Windows Server 2003, Windows NT 4.0, Windows 95/98/Me.
NOTE: The instructions displayed on the screen may differ according
to the model you are using, but setup can be operated with the same
procedure.
1. Start the OS.
2. Insert the attached NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive.
Master Control Menu will appear.