Filter
Top Products
ND-46550 (E) CHAPTER 2
Page 7
Revision 2.0
PN-DAIC (DAIC Card) Digital Interface Channel Expansion Card.
This card provides the 1.5Mbps (24 channel) digital interface.
1 through 6 DAIC cards can be provided at main site.
In Remote PIM, 2 DAIC cards can be provided.
Small Platform PIM: up to 64 line/trunks can be accommodated.
1000 IVS PIM: up to 47 line/trunks can be accommodated.
PN-BS00/BS01 (BUS interface Card) BUS interface cards for PIM0 or PIM1 through PIM7
For Remote PIM System, BS00 card is required at the main site, even if
the system is 1-PIM configuration.
PN-CP01 (FP Card) Firmware processor card
For Remote PIM System, CP01 card must be mounted on PIM0 at the
main site, even if the system is 1-PIM configuration.
RMT PCM-0.3 CA 1 ft. (30 cm) PCM signal cable
This cable is used for connection between DAIA card and BUS interface
card.
17-TW-0.3 CONN CA-A 1 ft. (30 cm) connection cable between DAIA cards
This cable is required when plural DAIA cards are mounted in a PIM at
the main site.
48-TW-0.2 CONN CA 1ft. (30 cm) connection cable.
This cable is used for connecting between DAIA card and DAIC card or
DAIB card and DAIC card.
Table 2-2 Required Equipment (Continued)
EQUIPMENT NAME DESCRIPTION