Filter
Top Products
ND-46550 (E) CHAPTER 3
Page 41
Revision 2.0
2.2.3Switch Setting of DAIC Card
Refer to Chapter 3, Section 2.1.3.
2.2.4Mounting of DAIC Card
STEP 1:
Set MB switch on DAIC card to up position.
STEP 2: Mount DAIC card in the AP slot on the Remote PIM.
A maximum of two DAIC cards can be mounted.
After mounting the card, set MB switch to down position.
STEP 3:
After mounting all DAIC cards, set MB switch on DAIB card to up, and then down.
Figure 3-17 Mounting Location of DAIC Card (Remote PIM)
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
Remote PIM
DAIC CARD
LT00
LT01
LT02
LT03
LT04
LT05
LT06/AP00
LT07/AP01
LT08/AP02
LT09/AP03
LT10/AP04
MP
P
W
R
•
Small Platform
AP05