NetComm NCT480 Network Router User Manual


 
NCT480 IP DSLAM User Guide YML856 Rev3
18 www.netcomm.com.au
Site Requirements
This section describes requirements for the site in which the NCT480 system is to be installed. Before you install
the NCT480 system, ensure that all the criteria in this section are met. The section describes the following:
Environmental Requirements
Power
Cabling
Rack Mounting
Environmental Requirements
To have proper operation of the NCT480 system depends on a proper environment. This section describes
environmental requirements for the site in which you intend to install the NCT480 system.
Temperature Humidity and Altitude
The system can tolerate a wide range of temperatures. Table 3-1 shows the recommendation for temperature,
humidity, and altitude conditions in a central office (CO) environment.
Environmental Specifications
Descriptions
Temperature
0º to 45ºC – Operating
-15º to 70ºC – Storage
Humidity
5 to 95% (non condensing)
Altitude
0 to 10,000 ft (0 to 3048 m)
Table 3-1 CO Operating Environment Requirements
To prevent the system from overheating, do not operate it in an area that exceeds the maximum recommended ambient
temperature of 45ºC.