NetComm NCT480 Network Router User Manual


 
NCT480 IP DSLAM User Guide YML856 Rev3
88 www.netcomm.com.au
Item Description
Hello Time
The value that all bridges use for HelloTime when this bridge is acting as the root.
Forward Delay
The value that all bridges use for Forward Delay when this bridge is acting as the root.
Hold Time
This time value determines the interval length during which no more than two
Configuration bridge PDUs shall be transmitted by this node, in units of seconds.
Bridge Max Age
The maximum age time of Spanning Tree Protocol information learned from the
network on any port before it is discarded, in units of seconds.
Valid values: 6 ~ 40 (Seconds)
Bridge Hello Time
The amount of time between the transmission of Configuration BPDU (Bridge Protocol
Data Units) by this node on any port when it is the root of the spanning tree or trying to
become so, in units of second.
Valid values: 1 ~ 30 (Seconds)
Bridge Forward Delay
This value, measured in units of seconds, controls how fast a port changes its spanning
state when moving towards the Forwarding state. The value determines how long the
port stays in each of the Listening and Learning states, which precede the Forwarding
state. This value is also used, when a topology change has been detected and is
underway, to age all dynamic entries in the Forwarding Database.
Valid values: 4 ~ 30 (Seconds)
Press the ‘Apply’ button to confirm the setting.
Table 6-5 Spanning Tree Protocol Dialog Description