NetComm NCT480 Network Router User Manual


 
YML856 Rev3 NCT480 IP DSLAM User GuideNCT480 IP DSLAM User Guide
www.netcomm.com.au 7
Features
NCT480 mini IP-DSLAM is designed to meet with industry standards in functionality, performance, and
reliability. As a compact IP-DSLAM platform, NCT480 can provide ADSL service for 48 users over existing
PSTN telephone wiring. More detailed features are listed below:
Hardware Features:
Pizza box type supports 48 ADSL ports and build-in POTS splitter equipped available
Cost effective access solution for always on high-speed Internet service application
Existing twisted pair telephone line via POTS splitter/Low-Pass-Filter, it means ADSL and telephone
services can be provided concurrently
Support service capacity expansion via units stacking
Two pair of 10/100/1000 Ethernet and mini-GBIC uplink Network uplink interfaces
One RS-232 serial console port
One 10/100 Base T Ethernet management port
Support non-blocking switching fabric and Wire-speed switching capability
Alarm input IO interfaces
Software Features:
Local system configuration and management through RS-232 console or the Ethernet management port
Remote system configuration and management using Telnet or web management through GE network
uplink interfaces
Embedded SNMP v1, v2c management agent with standard MIB-II
Support TFTP firmware upgrade
Support HTTP firmware upgrade
Support Subscriber traffic isolation among ADSL line ports
Support RFC 2684 bridge mode IPoE multi-protocol over AAL5
Support RFC 2516 PPPoE packet forwarding
Support QoS for IEEE 802.1p priority queues
Support Subscriber rate limiting
Support ADSL Line Profile and VLAN batch configuration
Support IEEE 802.1Q VLAN tagging
Support IEEE 802.1ad VLAN stacking and VLAN translation
Manually configurable mapping between VLAN tag and ATM PVC
Support IEEE 802.1D spanning tree bridging between Network uplink interface and any ADSL Subscriber
interface
Support IGMP snooping and Multicast
Support OAM F5 fault diagnostic
Support MAC address access control
Support IP/MAC packet filtering
Support IEEE 802.3ad link aggregation on Network uplink interface through CLI