Filter
Top Products
YML856 Rev3 NCT480 IP DSLAM User GuideNCT480 IP DSLAM User Guide
www.netcomm.com.au 27
Connecting the RJ-45 Network Uplink Interface
Complete the following steps to connect the RJ-45 network uplink.
To ensure the 1000 Base-T performance, please using the standard Category 5, 6, 7 Ethernet UTP cable.
Figure 4-5 Front Panel RJ-45 Network Uplink Cabling for NCT480
1 Connect one end of the RJ-45 to the “GigE 1” or “GigE 2” port on the NCT480 front panel.
2 Connect the other end of RJ-45 to the Layer 2 / Layer 3 switch router of provider’s
IP
network.
Figure 4-6 Front Panel mini-GBIC Network Uplink Cabling for NCT480