Filter
Top Products
NCT480 IP DSLAM User Guide YML856 Rev3
46 www.netcomm.com.au
Firmware Upgrade
The upload process uses HTTP (Hypertext Transfer Protocol) and may take up to three minutes.
After a successful upload, the system must reboot.
Figure 2-8 Firmware Upgrade Dialog
The following table describes the labels in this screen.
The NCT480 web management Firmware Upgrade file name must be “TEImage.bin.gz”.
Table 2-5 Firmware Upgrade Description
Item Description
Browse…
Type in the location of the file you want to upload in this field or click Browse… to find
the “.bin.gz” file.
Upgrade
Click this to begin the upgrade process. This process may take up to three minutes.
Clear
Click this to clear the location of the file in this field.