NetComm NCT480 Network Router User Manual


 
YML856 Rev3 NCT480 IP DSLAM User GuideNCT480 IP DSLAM User Guide
www.netcomm.com.au 23
CHAPTER 4 INSTALLING THE NCT480
This chapter describes how to install the NCT480 mini IP-DSLAM.
This chapter contains the following sections:
Installation Checklist
NCT480 System Installation Procedures
Installation Checklist
The Table 4-1 lists the task to be completed when installing the NCT480 mini IP-DSLAM.
Installation Procedures Page Number
Unpack the Shipping Carton
20
Setup the Hardware Environments:
• Connect the Console port to the PC’s COM port
• Configure the PC’s COM port
• Connect RJ-21 IP DSLAM Cable (Telco Cable)
• Connect RJ-45 Network uplink Interface
• Power on the System
Table 4-1 Installation Checklist