NCT480 IP DSLAM User Guide YML856 Rev3
48 www.netcomm.com.au
Restore Factory Configuration
Use restore factory configuration to restore configuration parameters of factory default values.
Figure 2-12 Restore Factory Configuration
The restore factory default parameters are list in Table 2-6.
Item Description
ADSL Layer
VPCI (VPI/VCI)
8/35 for each ADSL port interface.
Encapsulation
LLCMUX
Standard
ADSL2+ Auto
Bridge Layer and Ethernet IP
Bridge mode
Restricted bridge mode
Ethernet port 1 IP address
0.0.0.0 / 0.0.0.0, Uplink
Ethernet port 2 IP address
0.0.0.0 / 0.0.0.0, Downlink
Ethernet port 3 IP address
192.168.1.1 / 255.255.255.0, management port
Management
SNMP community
public (re-write privilege)
Web Management Username /
Password
admin / admin
CLI Username / Password
admin / admin
Telnet Username / Password
admin / admin
Table 2-6 NCT480 System Factory Default Parameters