NetComm NCT480 Network Router User Manual


 
YML856 Rev3 NCT480 IP DSLAM User GuideNCT480 IP DSLAM User Guide
www.netcomm.com.au 25
Connecting a Console
Complete the following steps to connect the NCT480 Console management.
1 Connect the RJ-45 to DB-9 adapter cable to the Console port on the NCT480.
2 Connect the other end (Female) to the computer’s COM port.
Figure 4-2 RJ-45 to DB-9-female Adapter cable for Console Management
Figure 4-3 NCT480 Console Port Management Cabling
Configure the PC’s COM port
Use your terminal emulation program (such as HyperTerminal in Windows) to set your COM protocol to the
following settings:
Parameter Setting
Baud rate
9600
Data bits
8
Parity
None
Start bits
1
Stop bits
1
Flow control
None
Table 4-2 NCT480 Console Management Setting