Filter
Top Products
Advanced Settings
123
D6200 WiFi DSL Modem Router
2. Click Add.
3. In the Route Name field, type a name for this static route (for identification purposes only.)
4. (Optional) Select the Private check box if you want to limit access to the LAN only
.
If Private is selected, the static route is not reported in RIP.
5. Select the Active check box.
6. T
ype the IP address of the final destination.
7. T
ype the IP subnet mask for this destination.
If the destination is a single host, type 255.255.255.255.
8. T
ype the gateway IP address.
The gateway IP address has to be a WiFi DSL modem router on the same LAN segment
as the WiFi DSL modem router.
9. T
ype a number from 1 through 15 as the metric value.
This value represents the number of WiFi DSL modem routers between your network and
the destination. Usually
, a setting of 2 or 3 works, but if this connection is a direct
connection, set it to 1.
10. Click Apply.
The route is made effective.