NETGEAR D6200 Network Router User Manual


 
Administration
94
D6200 WiFi DSL Modem Router
- Tx B/s. The current transmission (outbound) bandwidth used on the WAN and
LAN ports.
- Rx B/s.
The current reception (inbound) bandwidth used on the WAN and LAN
ports.
- Up T
ime. The time elapsed since this port acquired the link.
- Poll Interval.
The interval at which the statistics are updated in this screen.
3. T
o change the polling frequency, enter a time in seconds in the Poll Interval field.
4. Click Set Interval.
To stop the polling entirely, click Stop.
Connection Status
You can see how long your Internet connection has been operating.
To show the connection status:
1. Select Advanced >
Administration > Router Status.
2. Click Connection Status.
The following information displays:
IP Address.
The IP address that is assigned to the WiFi DSL modem router.
Subnet Mask.
The subnet mask that is assigned to the WiFi DSL modem router.
Default Gateway.
The IP address for the default gateway that the WiFi DSL modem
router communicates with.
DHCP Server.
The IP address for the Dynamic Host Configuration Protocol server
that provides the TCP/IP configuration for all the computers that are connected to the
WiFi DSL modem router.
DNS Server.
The IP address of the Domain Name Service server that provides
translation of network names to IP addresses.
Lease Obtained.
The date and time when the lease was obtained.
Lease Expires.
The date and time that the lease expires.
3. (Optional) T
o reset the information, click Release.
The Release button returns the status of all items to 0.
4. (Optional) T
o refresh the information, click Renew.