Filter
Top Products
Table 1. Power On/Off LED
Icon LED Activity Description
Solid green The WiFi DSL modem router is ready.
Solid amber The WiFi DSL modem router is booting, a POST (power-on self-test)
failure occurred, or the WiFi DSL modem router malfunctioned.
Blinking red LED blinks momentarily when the Reset button on the back of the WiFi
DSL modem router is pressed for 6 seconds.
The Power LED then blinks
red three times when the Reset button is released and then turns green as
the gateway resets to the factory defaults.
Off Power is not supplied to the router.
Table 2. DSL LED
Icon LED Activity Description
Solid green You have an DSL connection. In technical terms, the DSL port is
synchronized with an ISP network-access device.
Blinking green Indicates that the WiFi DSL modem router is negotiating the best possible
speed on the DSL line.
Off The WiFi DSL modem router is off or has no DSL connection.
Table 3. Internet LED
Icon LED Activity Description
Solid green You have an Internet connection. If this connection is dropped due to an
idle time-out but the connection is still present, the LED stays green. If the
Internet connection is dropped for any other reason, the LED turns off.
Solid amber The Internet (IP) connection failed. For troubleshooting information, see
Cannot Access the Internet on page 142.
Off No Internet connection is detected or the WiFi DSL modem router is in
bridge mode (an external device handles the ISP connection).
Table 4. Wireless LED
Icon LED Activity Description
Solid blue There is wireless connectivity.
Blinking blue A WPS-capable device is connecting to the WiFi DSL modem router.
Off There is no wireless connectivity. You can still plug an Ethernet cable into
one of the LAN ports to get wired connectivity
.
Hardware Setup
15
D6200 WiFi DSL Modem Router